The rusty chassis became unrecognizable. The easiest to use and fastest drying speed anti-rust converter is the chassis anti-rust converter!
Features:
🪄 Transform existing rust: The chassis rust converter transforms and replaces the existing rust with a black protective polymer barrier.
🪄 Protect iron and metal surfaces:It can restore and protect iron and metal surfaces on cars, trash cans, equipment, railings, etc.
🪄 Prevent future corrosion:This anti-rust treatment prevents future corrosion by preventing moisture in rain and snow.
🪄 Non-toxic, smoke-free formula:It is a non-flammable, low-VOC water-based treatment agent. It is non-toxic and does not emit harmful fumes.
Introduction:
🪄 Surface treatment:Use wire brush or sandpaper to remove large rust and scale particles. Clean the surface thoroughly to remove dirt, dust and grease.
🪄 Application:Shake well or stir well before use. Use a brush, roller or pump sprayer to apply two coats with at least 20 minutes of drying time between the two coats. Allow 48 hours of curing time before applying high-quality paint.
🪄 Cleanup:The application equipment should be cleaned immediately with soap and water.
🪄 General:Do not use this product if the surface temperature is below 50°F. Store in a cool, dry place to prevent freezing or temperatures exceeding 100°F. In order to protect the iron surface for a long time, the cured rust inhibitor coating should be sealed with two layers of high-quality oil-based paint. No other primer is needed.